International Harvester Duplex Type "C" Hopper Parts

A small example of the parts I have handled over the years. The lids are particularly uncommon, pictured is 2 of the 3 styles made. Duplex Type "C"Seed plates of different crops can be found below and some NOS drive pinions. IHC made a single plate version of the hopper using the same plates reffered to as a Type "G", that was used prior to the 1950's. The duplex hopper had an extensive production run lasting up until the late 1970's. The hoppers were available for direct bolt onto the POAX drives, and could be adapted to Combination drives with a simple cast adapter. Seed plates were available from tiny tomato seed all the way up to large beans and peanuts.

New Old Stock Peanut Bottom for IH McCormick Combination Seed Hopper for Farmall Planter

NOS Peanut Bottom for IH Combination Hopper. This was available for Cub, Super A, 100, 130 and 140 one row tractors as an add-on. The complete package would have consisted of 2 seed plates, 1 filler ring, the bottom, spring cut-off and screw/nut. 2 seed plates were commonly available, 1 for shelled peanuts, and 1 for peanuts in shell. 

top 

underside

One of the tractor sheds

A peek into one the tractor shed, some Farmall 140's, an International 504, a Farmall 404, a Cub Lo-Boy, and some others. 

Auxiliary Hydraulic Control Valve for IH Farmall C, Super C, 200, Super A, 100, 130, 140 Tractors

I offer new bolts for the Auxiliary Hydraulic Control Valve used IH Farmall C, Super C, 200, Super A, 100, 130, 140 Tractors. These bolts are NLA from Case-IH, and are proprietary to this one purpose. Two of the shouldered bolts are required for a proper seal of the control valve to the touch control reservoir. These bolts can be found on my website and ebay store.

Farmall Cub Carburetor Cleaning and Straightening

A pile of carb cores lined up for drying after a soapy bath to remove cleaning solvents. These are ready for straightening, inserts, polishing, cleaning again and then reassembly with all new parts. The IH Cub C60 Engine 3/4" Updraft Carburetors came in several revisions in parts #s with with different jetting and at least 2 different castings of bowls and tops, they all have the same outward appearance.

International Harvester Farmall Cub-22 Sickle Mower Parts

I keep a decent selection of new and rebuilt parts for the 22 Series Mowers used on Farmall Cub, Cub Lo-Boy, Super A, 100, 130 and 140 (Cub-22, L-22, and International-22 respectively). I offer rebuild services for knives (send in your head and spine), new IH sickle sections, ledger plates, rivets, pitman arms,rock guards, belts and more.  When correctly set up and properly adjusted, these are quick and efficient hay mowers, easily cutting in most grasses in 2nd Gear on a Cub, and 3rd gear on a Super A sized tractors. To eliminate clogging, sharp sections, correct drag, angle and good ledger plates are essential, as well as timing the knife. Keeping a spare wooden pitman stick, some sections and rivets are also nice to have for field repairs.

Cloth Covered Original Style Spark Plug Wires for Farmall Tractors

I offer custom and original style Copper Core American Made (wire, terminals, boots, labor) Lacquer coated cloth spark plug wires for IH Farmall Tractors. I can make these to factory length for Farmall Cub, A, B, C, H, M, Super A, C, Super C, and similar tractors.  I have from time to time New Genuine IH boots for that extra nice tractor.